Two (2) Replacement Main Rotors for Mini Infrared Remote Control Electric
Product Description
Includes bonus YELLOW tail propeller. This is a set of 2 replacement primary drive rotor blade sets for the Mini Heli Infrared Indoor Helicopter, Bell Heli IR Indoor RC Helicopter, Picco Z, Havoc Heli and clones. Every single heli requires 1 set. It is a good idea to maintain a spare rotor on hand to let you preserve flying in case yours is damaged in a crash. If you shed the little silver weights in the leading stabilizer you are going to have to have to purchase a new rotor blade. Principal Rotor Blade Specifications: Rotor Diameter: five.2" (13.2cm) Material: Flexible black plastic Capabilities: Integrated stabilizer (leading hinged portion) This Major Rotor Blade Is Compatible With: Mini IR Helis Mini Bell IR Heli, Spin Master Air Hogs Havoc Helis, Silverlit Picco Z, Clones like PiccoZ, PicooZ, etc...
Product Details
- Product Dimensions: 6 x 3.9 x 1 inches ; 0.3 ounces
- Shipping Weight: 8 ounces (View shipping rates and policies)
- ASIN: B000RK43FG
- Item model number: GEN-002A
- Manufacturer recommended age: 13 years and up
- Amazon Best Sellers Rank: 4,955 in Toys ; Games (See Top 100 in Toys ; Games)
- 17 inToys ; Games Hobbies Radio Control Parts
By : Mini IR Helis
List Price :
Price : $5.79
You Save : $9.20 (61%)
Product Characteristics
- Two key helicopter rotor blades - Black
- Includes bonus YELLOW tail propeller.
- Fits air hogs havoc heli, havoc stinger, venom micro ranger, picooz, and brandmates
- Preserve your preferred micro helis flying
Client Evaluations
I bought this as a replacement for a Yiboo mini Euro Tiger Airsquire, which broke one particular of the connecting arms between the primary rotor and stabilizing bar. These new rotors have a slightly various stabilizer - it has far more of a wing profile than the original sort. I wasn't positive if they would operate but for $four what is there to lose?
As soon as fitted, the helicopter flies a lot a far better than it ever did ahead of! It is a lot much more stable and doesn't veer off into the wall when attempting to take off (which is what broke my original rotor). Some reviewers right here mentioned that their models would not fly any extra considering that of the weight of the new rotors, but the Yiboo is OK.
No directions came with the new rotors so here's what worked for me (For the Yiboo anyway). Receiving the old rotor off is not simple! If the old rotor will not simply pull off:
Cut across the plastic shaft of the old rotor just beneath the stabilizer bar, and above the tell tale hole with wire cutters or similar. You can now eliminate the stabilzer and most important rotor. Do not cut any lower as you will cut via the metal drive shaft. This leaves the plastic shaft which is portion of the rotor about an inner metal shaft which conencts to the drive motor. You have to be careful not to bend or damage the metal shaft.
Cut along the length of the remaining plastic shaft with a craft knife. It takes quite a few cuts to get by way of. I produced two cuts 180 degrees apart. Be careful not to cut oneself! You can now peel the two halves of the remains of the plastic shaft away from the metal inner shaft. I could not get all the way to the end of the plastic as it was within the physique of the helicopter. Cutting as far down as I could, and peeling away released the plastic part from the metal shaft and I was able to pull the remains of plastic away from the metal inner shaft. This system completely destroys the old rotor of course, but I'm assuming you're replacing it simply because it is already damaged.
The new rotor just pushed onto the shaft quite quickly. I used washing up liquid to ease it on and the pressure of my finger and thumb was adequate. You know it is on far enough when you can see the metal inner shaft by way of the tell tale hole.
I can't guarantee that this approach will perform for all brands of Electric Helicopter, but it may very well give some helpful hints. Decent luck and pleased flying.
This is the correct part if you have a PicooZ/Air Hog Havoc two-ch heli.
Make certain that the rotor fits snugly, simply because a loose fit will not offer adequate lift to get your heli up and operating even though the rotors appear to spin . You also have to adjust trim and make confident that the tail rotor is clean of wrapped hair or fuzz, and perfectly perpendicular to the principal rotor- these are crucial for appropriate functioning of the heli, and generally have to be checked/adjusted soon after each and every crash.
This replacement is definitely sturdier than the original rotor, as well as the single spare that came with the original heli.
This item has restored my small heli to full function and created me a pleased small child once more, substantially to my wife's chagrin.
